Skip to content

Reading an e-bike geometry table

Reviewed on 17 November 2026

The chart is a wall of numbers with no explanation. You don't need every row. This page sorts them into the ones that decide fit and the ones that don't.

Rows that matter for fit

Bicycle Guider's advice for mountain-style bikes is to start with reach and stack, then confirm effective top tube and standover in the brand's geometry chart.1

Row What it means Why you'd look at it
Reach The horizontal distance from the centre of the bottom bracket to the top of the head tube2 How long the front of the bike is
Stack The vertical distance between the same two points2 How tall the front of the bike is
Standover height The height of the top tube above the ground2 Whether you can straddle the frame
Effective top tube A row Bicycle Guider says to confirm in the brand's geometry chart1 Wikipedia lists a "(virtual) top tube length" among the measures designers compare2
Seat tube length The length of the seat tube, which is often the number behind the size label3 Designers still compare it2

Rows that tune the picture

Seat tube angle. Comparing frames by top tube length only works if the seat angles are similar. Sheldon Brown says each degree of difference corresponds to about a centimetre of top tube length.3

Head tube angle. It's another angle designers compare between frames, along with the seat tube angle and seat tube length.2

Toe overlap. This is the amount the feet can interfere with steering the front wheel.2

Rows that describe handling more than fit

Wikipedia lists other measures too, such as bottom bracket drop and front centre, and says frame geometry also affects handling.2 Those are less direct for choosing a size. Bicycle Guider notes that geometry can differ between brands, so compare the numbers on the specific model's chart.1

A sensible order for reading the tableFind your size columnRead reach and stackCheck standover and top tubeLook at seat tube angleLeave the handling rows for last
Fit rows first, then handling rows.

Fixing a table that doesn't make sense

  1. Sizes are in different units. One maker uses millimetres and another uses inches. Convert before you compare, and don't compare a label to a number.
  2. A row is missing. Not every brand lists every number. Bicycle Guider says charts list extra numbers like reach and stack because sizes don't always match across companies.1 If a row is missing, ask the maker for it.
  3. Two sizes look close. Compare reach and stack first, then standover. There's a note on reach and stack and another on standover.
  4. The saddle rows confuse you. Saddle height depends on how far the post is inserted, which the seat tube note explains.

For why one row can read differently from one maker to the next, see the page on why brands disagree.

Notes and sources

  1. Bike Size Guide to Choosing the Right Fit, Bicycle Guider
  2. Bicycle frame, Wikipedia
  3. Revisionist Theory of Bicycle Sizing, Sheldon Brown