Skip to content

Measuring yourself for a size chart

Reviewed on 17 November 2026

A size chart gives height ranges and you sit right on the edge of two. Or the chart asks for an inseam and you've never measured one. Start with the two numbers nearly every chart wants.

Which measurements makers ask for

One guide says you need two measurements: height and inseam.1 Inseam is the length of your inner leg, from the floor up to your crotch.

Some fitting systems ask for more. Sheldon Brown notes that several sizing systems require various measurements of the cyclist's body and then recommend frame sizes from them.2

Check the maker's own chart for the exact list. If it asks for something you've not measured, take that one before you decide.

How to take them

You need a tape measure, a book and about 30 seconds.1

Height. Stand against a wall, put a book on your head, and measure from the floor to the book.1

Inseam. Take your shoes off, keep your feet hip-width apart, and measure from the floor to your crotch.1

Taking your two basic measurementsTake your shoes offStand tall against a wallMeasure height with a bookMeasure inseam, floor to crotchCompare with the maker's chart
Do each one a few times and write the numbers down.

When the numbers don't agree

You're between two sizes. Or your height says medium and your inseam says large. Work through these in order:

  1. Re-measure, and take each number more than once.
  2. Look at the maker's own chart for your model, not a general one. Charts differ, and this page on maker differences explains why.
  3. Think about your proportions. Bicycle Guider lists long arms, or a wingspan greater than your height, as a reason to size up.1
  4. Read the geometry table for the two candidate sizes. The reach and stack page shows what to compare.

Sheldon Brown points out that a person on a larger frame is likely to have a longer upper body than a person on a smaller one. That's why body length matters as well as leg length.2

Where a chart stops helping

A chart gives you a starting size, no more. Bicycle Guider says a professional bike fitting at a local shop will give you the most accurate results.1

If a shop can't be reached, use the maker's chart and follow the maker's manual for adjusting the saddle and handlebar on your own model. How the saddle post works is covered in a page on saddle height.

Men's, women's and unisex charts

You may see charts split by gender. Bicycle Guider says women-specific models often have features like narrower handlebars, shorter stems, or saddles designed for female anatomy.1

For sizing itself, it says there's no fundamental difference. Both use the same frame measurements, and the same charts apply to all adult riders.1

So take the same measurements whichever model you're looking at. Then fine-tune the fit with the saddle, stem or handlebar, which the guide names as the way to adjust once the frame size is right.1

Notes and sources

  1. Bike Size Guide to Choosing the Right Fit, Bicycle Guider
  2. Revisionist Theory of Bicycle Sizing, Sheldon Brown