Skip to content

Reach and stack explained

Reviewed on 17 November 2026

A bike says medium, you ride a medium from another maker, and this one feels stretched out. Or it feels tall at the front. Reach and stack are the two numbers that explain that.

The two definitions

Both start at the same spot: the centre of the bottom bracket, which is where the cranks turn. Both end at the top of the head tube, the short tube that holds the fork.

  • Stack is the vertical distance between those two points.1
  • Reach is the horizontal distance between them.1

Think of a corner-to-corner line. Reach is how far across it goes. Stack is how far up.

What they tell you

Reach says how long the front of the bike is. Stack says how tall it is. A bike with a longer reach tends to stretch you forward. A bike with a higher stack puts the handlebars higher.

That reading comes from the definitions, not from any maker's rule, and the parts you add change it. A stem, spacers and handlebar all sit above the head tube. The frame numbers only describe the frame.

Bicycle Guider says geometry charts list reach and stack because the size labels don't always match across companies. You don't measure them yourself at home, but they let you compare how different bikes in the same size will feel.2

Using reach and stackPick a size from the chartRead reach and stack for that sizeCompare with a bike that fits youCheck the stem and spacers
Start with the size chart, then compare these two numbers.

Why not just use tube lengths

Older advice leaned on the top tube. Sheldon Brown argues that top tube length tells you more than seat tube length about how the rider will sit on the bike.3

That only works if the frames are alike. He adds that each degree of difference in seat tube angle corresponds to about a centimetre of top tube length.3

So a top tube number can mislead when the seat angles differ. Reach and stack skip that problem because they're measured from the centre of the bottom bracket. In its mountain bike and e-MTB section, Bicycle Guider says that with modern geometries, tube lengths alone aren't useful.2

Fixing a bike that feels wrong

Work through these in order.

  1. Find the reach and stack of the bike you're riding now, if the maker lists them. Compare them with the new bike's table.
  2. If the new reach is clearly different from the one that suits you, look at the neighbouring size in the same chart. For mountain bikes and e-MTBs, Bicycle Guider says to begin with reach and stack, then check effective top tube and standover against the brand's geometry chart.2
  3. Ask whether a part, rather than the frame, is the problem. The frame numbers don't include the stem or handlebar.
  4. Follow the maker's manual for any change to the stem or handlebar on your model.

To see where these two rows sit among the others, go to the chart-reading page. Reach and stack don't cover clearance over the top tube, which has its own page.

Notes and sources

  1. Bicycle frame, Wikipedia
  2. Bike Size Guide to Choosing the Right Fit, Bicycle Guider
  3. Revisionist Theory of Bicycle Sizing, Sheldon Brown